from water infiltration and weathering in general?
FIBREGLASS WINDOWSILL COVERING
TERMOSOGLIA and TERMOSTONE SOLUTIONS by Coprimuro.net
easy to apply and completely waterproof.
and TERMOSTONE
by Coprimuro.net
Solid, lightweight and easy to assemble, they ensure complete waterproofing because they are coupled with a thermoacoustic membrane which avoids the need for insulation.
TERMOSOGLIA is a marmoresin and fibreglass-based coating coupled with an open-cell polyurethane foam membrane coated with isoneopentyl gelcoat with a thickness of 0.1/2.00 mm. This product is used in the field of building renovation and energy upgrading.
The product can be used as design furnishing in general. In the building industry, on the other hand, not only can it be used as a windowsill for ventilated facades, but also as a windowsill covering and for building finishes in general.
TERMOSOGLIA is completely waterproof thanks to its fibreglass substrate and marmoresin covering. TERMOSOGLIA is glued using our two-component Coprilastik glue or Coprivodirefill Pur., and can be cut using a standard circular saw.
Termosoglia is a certified product.
Termosoglia: the benefits
- it is easy to fit;
- it is coupled with a thermoacoustic membrane which avoids the need for insulation;
- durable over time thanks to minimal ageing;
- made from lightweight materials;
- adaptable to any point;
- thanks to its adequate depth it fully covers the old windowsill;
- it covers the entire thickness of the covering;
- the right thickness avoids obstructing the closure of shutters and any anti-condensation apertures present;
- it is supplied with a terminal section;it is available in different colours;
- it is supplied to measure;
- it does not absorb;
- it does not need any treatment.
Use
This product is used in the field of building energy renovation and redevelopment.
Because it is lightweight, easy to work and nice to look at, this is also an exclusive furnishing and design product.
The fibreglass substrate: TERMOSOGLIA is completely waterproof thanks to its fibreglass substrate, made up of thixotropic polyester resins, mineral fillers, glassfibre Mat 450 g/sqm and isoneopentyl gelcoat.
Il supporto in marmoresina: si ottiene da polveri di marmo e resine poliestere da esterno.
Gluing: gluing is carried out with two-component glue or Pur coprivodirefill.
Cutting: can be cut with standard circular saws.
Surface treatment: on request, it can be treated during production with transparent gelcoat HE080022SZ.
Acoustic thermal value:
- Density: UNI EN ISO 845 U.M. kg. cu. m. nominal value 40 (36-44) tolerance +/-4
- Thickness: 10 mm
- Coefficient of thermal conductivity: 0.038 W/mk
- Noise reduction: ∆Lw = 26 Db
TERMOSTONE is a fibreglass-based coating coupled with open-cell polyurethane foam membrane covered with a 0.1/2.00 mm natural stone slab. Obtained by the tear-off technique.
This product can be used for furnishing in general and design. In the building industry, on the other hand, it can be used as a wall for ventilated facades and door and windowsills and their coverings and for building finishes in general.
TERMOSTONE is completely waterproof thanks to its fibreglass substrate, consisting of thixotropic polyester mineral resins, glass fibres and isoneopentyl gelcoat.
TERMOSTONE gluing is carried out using our two-component Coprilastik glue or Coprivodirefill Pur. It can be cut using standard circular saws, and the surface is best treated with chemical products used to protect the stone or to lacquer the surface with wood lacquer.
On request it can be treated with transparent gelcoat during the production process.
Some examples of stones used for TERMOSTONE are: quartzite, slate, sandstone and many others.
Quartzite has a grained structure, with medium to coarse grain. This material contains silicon, which creates a shining surface. Due to geological reasons, quartzite slabs can only be extracted in limited formats.
Sandstone is a sedimentary rock containing quartz sand. The high percentage of white sand, with light brown to dark brown veins, gives the stone-veneer sahara its beautiful texture. 90% of the stone-veneer sahara is quartz sand with grains from 1 to 2 mm thick. The sandstone is used internally and externally. By means of heat supply, sahara can also be worked three-dimensionally.
TERMOSTONE: the benefits
- it is easy to assemble;
- it couples with a thermoacoustic membrane that prevents the need for insulation;
- durable over time thanks to minimal ageing;
- it is made from lightweight materials;
- it is adaptable to any position;
- thanks to an adequate depth it covers the old windowsill entirely;
- it covers the entire thickness of the cladding;
- the right thickness does not in any way obstruct the closure of shutters and any anti-condensation apertures present;
- it is supplied with a finishing terminal section;
- it is available in different colours;
- it is supplied to measure;
- it does not absorb;
- it does not require any treatment.
- in addition, (compared to Termosoglia) it is available with natural stone effect finishes.
Use:
The field of application, thanks to its lightness, its ease of processing and beauty, make it an exclusive product for furnishing in general and for design. In the building industry, it can be used as a wall for ventilated facades and windowsills and their coverings and building finishes in general.
The fibreglass substrate: TERMOSTONE is completely waterproof thanks to its fibreglass substrate, consisting of thixotropic polyester resins, mineral fillers, glass fibre Mat 450 g/sqm and isoneopentyl gelcoat.
Gluing: gluing is carried out with coprilastik two-component glue or Pur coprivodirefill.
Cutting: it can be cut using standard circular saws.
Surface treatment: the surface is best treated with chemical products used to protect the stone or to lacquer the surface with wood lacquer.
On request, it can be treated during production with transparent gelcoat HE080022SZ.
Acoustic thermal value
- Density: UNI EN ISO 845 U.M. kg.cu m nominal value 40 (36-44) tolerance +/-4
- Thickness: 10 mm
- Coefficient of thermal conductivity: 0.038 W/mk
- Noise reduction: ∆Lw = 26 Db
What they say about us
The opinions that really matter...those of the customers who have preferred Coprimuro.net
Coprimuro.net, una garanzia!
Resa estetica impeccabile
Hotel rinnovato, clienti + contenti!
Muri in perfetto stato e senza danni o segni di usura